PoE Texas PoE Switch 4 Port - 802.3af/at Power Over Ethernet with 4 PoE+ Ports, 2 LAN Uplink, VLAN & Extender - 65W High Speed Unmanaged Wired Network Switch - Security Cameras, WAP’s & More
Product Description
Power up to four IEEE 802.3af/at standard cameras, desktop phones, WiFi Access Points or other low voltage electronics over 300 feet from PoE source. Our intuitive 4 port PoE switch can support up to four 802.3at devices with a total power budget of 65 watts. Each of the 4 ports will deliver a maximum of 25.5 watts to one device. Harness up to 65W of power, distributed over all of your plugged-in devices.
Upgrade to PoE+
PoE+ opens the door for the addition of downstream node controllers, saving on network cabling. Perfect for pairing with PoE injectors and USB-C PoE splitters, also available from PoE Texas. Add multi-radio WiFi Access Points to increase bandwidth. Install modern Point-Tilt-Zoom cameras for improved security. Power USB Type C devices and tablets using our USB-C PoE splitter. PoE+ is essential if you want to build out a robust network of varied devices without limitations on what you can plug into a port.
Unmanaged 4 Port Switch
Dual RJ45 uplink ports transmit Gigabit data from your network to the switch, with 4 PoE+ RJ45 ports rated for 10/100Mbps. This PoE 4 port switch delivers all the data and power needed for reliably fast ethernet, uninterrupted livestreaming, and rapid upload/download speeds -- at an affordable and cost-effective rate for residential customers and small business owners.
** Not UL Certified
PoE Detector & Tester: Frequently Asked Questions
Effective Temperature Regulation
Fanless metal housing has wide temperature resistance and humidity tolerance. Suitable for a diverse range of climates and environments.
Operating Humidity: 10% to 90%
Operating Temperature Range: -4°F to 122°F
Silent Operation
Fanless design means zero added noise in the location. Ideal for noise-sensitive environments.
|
|
|
|
|---|---|---|
|
A simple toggle switch allows you to separate each port with its own VLAN for heightened security. Ensure traffic stays isolated and no data gets shared between any of the devices plugged into the 4 ports. |
Toggle the switch the opposite way to extend PoE and data for long distance, low bandwidth applications. Default Mode: Up to 300 feet transmission distance at 10/100Mbps data speed Extend Mode: Up to 820 feet transmission distance at 10Mbps data speed |
Failsafe design. Two uplink ports for LAN allow you to add architecture security, so critical systems aren’t relying on a single network connection. |
