Rockville DV12K6D1 Dual 12" 4800w Car Audio Subwoofers Plexi Sub Enclosure Box

Product Description

Rockville DV12K6D1 Dual 12" 4800w Car Audio Subwoofers Plexi Sub Enclosure Box

Description:

Finally! Rockville enclosures!

We didn’t want to just put out any enclosure and slap our name on it. Our subs deserve a better home than an ordinary pre-fab enclosure! We tasked our team to make the nicest enclosure in the history of car audio and this is what they came up with!

The enclosure is strong and sturdy and has amazing sound! That is what is most important of course. But wait, there is more! This is a show ready enclosure! The front panel has thick plexi glass and we put LED’s in strategic locations that give this a really unique design that you will not find anywhere else. The LED’s have a selectable switch allowing you to select white or blue.

Did we succeed in making the nicest enclosure ever ? I searched all the popular brands and I did not find any enclosure that looked better.

Housed inside this enclosure are our famous K6 subs.

Enclosure Features:

Rockville DV12K6D1 Dual 12" 4800w Car Audio Subwoofer w Plexi Sub Enclosure Box
Final Impedance: 1 Ohm
Peak Power Handling: 4800 Watts
Continuous RMS Power Handling: 1200 Watts
¾” MDF enclosure with black carpet
1” MDF where the subs are mounted
Made with Sexy-Plexy! Plexi-glass front panel
LED with selectable colors (white or blue selectable) (The LEDs were designed to have a professional look for a show car)
Show ready enclosure! We were given the challenge by our team to develop the nicest enclosure in the history of car audio and this is what we came up with. We hope you all love it!
Bonded stapled and braced and it is strong as a beast
Vented enclosure (side firing)
Pre-wired down to a 1 ohm final impedance
Copper push terminals
Vent dimensions: 1.77" x 11.57" x 15.75"
Tuning frequency of enclosure: 35 .6Hz
Dimensions: 15.2” H x 32.01” W x 12.6 or 15.75” D (the rear of the enclosure is sloped so the depth is different on the top and bottom)

Sub features:

2.5" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire
The wire we use is made in the USA! It is one of the most important components to make the sub high quality and last longer
Double Stacked 100 Oz High Quality Magnet
Cast Aluminum Basket With Black Sanded Finish Makes This Sub Very Efficient
Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone
Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion
Polypropylene (PP) Dustcap
Two Chrome-Plated Binding Post Terminals - These are the best terminals on the market and they accept any gauge wire
Impedance: Dual 4-Ohm Voice Coils
Vented Hole on T-yoke Enhances Heat Dissipation
High BL Magnetic Motor Gap
We use the highest grade black glue that handles extremely high temperatures which allows our woofer to handle even more power than they are rated
Cutout Diameter: 11.125” inches
Mounting Depth: 5.75” inches
Frequency Response: 27 Hz - 1.5K kHz
8mm T-Yoke + 8mm Washer
Sensitivity: 85dB
XMAX:22 MM (One way)

Product Quick Look

Enclosure Features: Rockville DV12K6D1 Dual 12" 4800w Car Audio Subwoofer w Plexi Sub Enclosure Box. Final Impedance: 1 Ohm. Peak Power Handling: 4800 Watts. Continuous RMS Power Handling: 1200 Watts. ¾” MDF enclosure with black carpet. 1” MDF where the subs are mounted.
Made with Sexy-Plexy! Plexi-glass front panel. LED with selectable colors (white or blue selectable) (The LEDs were designed to have a professional look for a show car). Show ready enclosure! We were given the challenge by our team to develop the nicest enclosure in the history of car audio and this is what we came up with.
We hope you all love it!. Bonded stapled and braced and it is strong as a beast. Vented enclosure (side firing). Pre-wired down to a 1 ohm final impedance. Copper push terminals. Vent dimensions: 1.77" x 11.57" x 15.75". Tuning frequency of enclosure: 35 .6Hz.
Sub features: 2.5" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire. The wire we use is made in the USA! It is one of the most important components to make the sub high quality and last longer. Double Stacked 100 Oz High Quality Magnet. Cast Aluminum Basket With Black Sanded Finish Makes This Sub Very Efficient.
Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone. Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion. Polypropylene (PP) Dustcap. Two Chrome-Plated Binding Post Terminals - These are the best terminals on the market and they accept any gauge wire. Impedance: Dual 4-Ohm Voice Coils.
Vented Hole on T-yoke Enhances Heat Dissipation. High BL Magnetic Motor Gap. We use the highest grade black glue that handles extremely high temperatures which allows our woofer to handle even more power than they are rated. Cutout Diameter: 11.125” inches. Mounting Depth: 5.75” inches.
Frequency Response: 27 Hz - 1.5K kHz. 8mm T-Yoke + 8mm Washer. Sensitivity: 85dB. XMAX:22 MM (One way)

Package Dimensions	36 x 19.5 x 19 inches
Item Weight	89.8 pounds
Item model number	DV12K6D1
Other display features	Wireless
Included Components	1
Manufacturer	ROCKVILLE
Date First Available	August 11, 2021

Reviews

Write Your Own Review

You're reviewing:Rockville DV12K6D1 Dual 12" 4800w Car Audio Subwoofers Plexi Sub Enclosure Box

Your Rating

Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Summary

Review